LAWO POWER CORE User Manual page 136

Channel State & Channel State 10
sapphire, sapphire compact & ruby / POWER CORE
This element is designed to fit alongside the channel PPM, and provides an overview of channel status.
The element is configured to a specific fader strip by VisTool Editor (see VisTool Editor Reference: PPM
elements - ChanState or ChanState-10), and includes:
·
DSP Status (EQ, DYN, COMP, EXP, GATE, LIM, DELAY) – these indicators turn from green to red
whenever the DSP module is on. DYN is the status of the master dynamics on/off; COMP, EXP and
GATE show the status of the individual sections.
·
VCA Grouping (not available for crystal) - if the fader is assigned to a VCA, then the VCA master is
shown here.
·
Bus assignments – show the name and status of the first 10 (or 20) bus assignments as defined within
the system configuration:
o Red – indicates a pre-fader assignment.
o Yellow – indicates a post-fader assignment.
o Green – indicates no assignment.
·
Gain Reduction - these three meters show gain reduction for:
o D = Dynamics
o L = Limiter
o S = De-esser
136/459 Version: V6.0.0/5
9. Audio Mix Engine
crystal
POWER CORE User Manual