13. Control Surface Configuration
Programming Fader Mappings
Up to 12 different fader mappings, plus the default state, may be configured for each Fader Module, and each
mapping may be triggered by any control signal. In the example below, two MF Keys are programmed to switch
between the default state and Map 1. There are two parts to the configuration: first, name the MF Keys, and then
configure the Fader Mappings.
Naming the MF Keys
1.
Double-click on the module you wish to configure from the Frames -> Surface window (or open the
"Surface ->
Module" branch of the 'Tree Definition') and name the MF Keys. In our sapphire example below, we
have named MF 29 and MF 30 on the Key Extension Module as Map1 and default map:
POWER CORE User Manual
Version: V6.0.0/5
201/459