Table of Contents
Advertisement
13. Control Surface Configuration
3.
Now enter the fader IDs which will map to each fader strip when Map 1 is active:
·
Use boxes 1.1, 1.2, 1.3, 1.4 for Layer 1, strips 1 to 4
·
Use boxes 2.1, 2.2, 2.3, 2.4 for Layer 2, strips 1 to 4
The fader IDs are the unique IDs defined by the CAN bus address listed earlier. In our example, we will map fader
strips 17 to 20 and 21 to 24 onto Layers 1 and 2 of the first Fader Module.
POWER CORE User Manual
Version: V6.0.0/5
203/459
Advertisement
Table of Contents
