LAWO POWER CORE User Manual page 138

9.9.5 Metering Settings
Open the "System -> Definition -> Parameter = Meter" branch of the 'Tree Definition' to set the reference levels
and metering options for the control surface and VisTool.
Parameter
Relative System Level
(dBFs)
Overload Thrs (dBR)
Analog Ref Level (dBu)
Silence Thrs low (dBR)
Silence Thrs high (dBR)
Silence Timeout low (sec) Enter the period of time, for which the level must be below the defined threshold to activate
Silence Timeout high (sec) Enter the period of time, for which the level must be above the defined threshold to
The Meter A, Meter B and Meter 1 to 4 entries define the six stereo meters which can be displayed within
VisTool. For each stereo meter you can define:
Meter Name
Meter L, Meter R
138/459
Meter – reference name for the element.
Sets the relative system level in dBFS, see
Sets the overload metering point. Set the Overload Threshold to 3dB above the working
point to encourage good operating practice.
Sets the analogue reference level in dBu, see
Enter the level at which the silence detect will become active for crystal meter channels.
Enter the level at which the silence detect will become inactive. Use these two values to
set a range to avoid flicker.
the silence detect. Use 0 for immediate signalisation.
deactivate the silence detect.
Enter a reference name for the meter.
Assign a source to the left and right meter inputs.
Version: V6.0.0/5
9. Audio Mix Engine
Reference Levels.
Reference Levels.
POWER CORE User Manual