Table of Contents
Advertisement
19. Networking POWER CORE
19.4.3 Ember+ Matrix Control
The Ember+ Matrix element allows an Ember+ consumer to control crosspoints within an Ember+ provider. The
element does not control any crosspoints directly, but is referenced from other elements including a
Connect,
Matrix Multi
Connect,
There are three parts to the configuration. First, define the system to be an
Definition -> Parameter = Local Consumers"). Then define an Ember+ Matrix element as described below.
Finally, on the Ember+ provider, publish the matrix you wish to control.
Ember+ Matrix Parameters (on the Consumer)
On the consuming device, add an Ember+ Matrix element to the "Ember+" branch of the 'Tree Definition':
EmBER+ Matrix
Matrix Nr
Local Consumer Nr
Matrix Type
Matrix Name
POWER CORE User Manual
Matrix
Query,
Matrix Control 128 * 128 Module
Reference name for the element.
Assign a number to the matrix - this will be referenced from the controlling element (e.g.
from a
Matrix
Connect).
Assign the Local Consumer
Definition -> Parameter = Local Consumers").
Select the external matrix type you wish to control:
·
Nova17 for sapphire, sapphire compact, crystal or Nova17
·
Nova29
·
Nova73
·
Vpro8
The name will reference to the Ember+ Name defined in the "System -> Definition ->
Parameter = Matrix Ember+ element on the providing device (described below).
Version: V6.0.0/5
and
Ember+ Consumer
number
you wish to use (as defined under "System ->
Matrix
Matrix Control
Module.
(in the "System ->
373/459
Advertisement
Table of Contents
