Table of Contents
Advertisement
Configuring the Elements
Each macro definition actions the elements you programmed
the next step is to create a list of these under the Elements branch within the Macro Editor.
All elements to be used within macros MUST be entered here. If not, they cannot be referenced to the
system configuration.
1.
Open up the Elements branch within the Selection Area on the left of the display to view the elements:
If this is a new configuration, as in our example, you will see a dummy entry called KeyXY. You will need to
create a new entry for every element which you wish to be controlled by a macro.
2.
To add a new element right-click anywhere within the Selection Area, and select Create and Element.
A New Element is added to the Elements branch:
324/459
18. Configuring Custom Logical Behaviour
earlier
within the system configuration. Therefore,
Version: V6.0.0/5
POWER CORE User Manual
Advertisement
Table of Contents
