Table of Contents
Advertisement
19. Networking POWER CORE
Assigning DAW Parameters
1.
To assign a central control function onto an MF Key, open the "System -> Definition" branch of the 'Tree
Definition' window:
2.
Select the control function you wish to assign - for example, ProTools = V Pot Assign:
3.
Now double-click in any of the parameter boxes to assign the function to an MF Key.
The control outputs from the DAW can be assigned to action a function within POWER CORE. For example, to
light an MF Key. The outputs are found under the "Logic" branch of the 'Tree Selection' window.
POWER CORE User Manual
Version: V6.0.0/5
379/459
Advertisement
Table of Contents
