13. Control Surface Configuration
13.5.1 Configuring the MF Keys
Select the Keys tabs (in the "Surface -> Central Module" branch of the 'Tree Defintion') to define the MF Key
name and its lamp colour/state. These parameters are identical to those on a fader strip (described earlier).
To configure the MF Key functions, assign the MF Key to the required function from the 'Tree Selection' window.
For example, the MF Key below will switch the output of a TConn64 monitor source selector to PGM:
POWER CORE User Manual
Version: V6.0.0/5
207/459