LAWO POWER CORE User Manual page 168

12.3.7 Configuring the MF Key Lamps and Labels
You can now define how your talkback buttons will respond to incoming calls and how they light when you press
them. The example below shows the definition of the MF Key lamps and labels for a KSC-LCD14P2 panel. If you
are using a VisTool touch-screen button or an external control signal, then you will need to define their signaling
parameters accordingly.
Each Intercom element provides the following logic control signals:
incoming active
outgoing active
n defined
n incoming
n outgoing
n blink
n Label
168/459
Active if any incoming call button is active.
Active if any outgoing call button is active.
Active when the specified button is configured within the
Active when the specified incoming call button is active.
Active when the specified outgoing call button is active.
Active when the specified incoming call button is active (Alias of incoming).
The Name given to the InterCom station within the
MF Key Lamp configuration
Version: V6.0.0/5
12. Intercom
InterCom software.
InterCom software.
POWER CORE User Manual