Table of Contents
Advertisement
9. Audio Mix Engine
Configuring MF Keys for Operator Control
Each source may be configured with an MF Key which will enable or disable the conference system. There are a
few possible options; this example uses the Conf Toggle parameter. As usual, there are three steps to configure
each MF Key:
1.
Name the MF Key - this happens automatically when you name the source.
2.
Assign the MF Key to the Conf 1 Toggle source parameter (from the Conf menu tab):
3.
Assign the Conf 1 control signals to the MF Key lamp states (from the Keys menu tab):
Our example uses the Conf 1 off, Conf 1 in use and Conf 1 Audio control signals. This creates an MF Key
which will add or remove the source to/from the Conference 1 system, and illuminate in different colours to
indicate the conference state. See
POWER CORE User Manual
Source -> Conf
for more parameter and status options.
Version: V6.0.0/5
101/459
Advertisement
Table of Contents
