Table of Contents
Advertisement
Selecting an AES67/RAVENNA Stream from the Control Surface
Once you have transferred the configuration, assign the RAVENNA Source to a fader strip. Then:
1.
Tap down on the rotary control until you reach the RAVENNA Group select.
2.
With the arrow pointing at the streaming Group, turn the control to browse through the available
streaming Groups and press down to make a selection.
3.
Then turn to scroll through the available streams (detected on the network).
4.
Press the Take button to assign the stream.
There will be a brief pause in the audio while the streaming connection is configured; during this time, the label
display at the bottom of the fader strip shows the status of the connection process. If the subscription is
successful, then the name of the connected stream is displayed.
84/459
Version: V6.0.0/5
9. Audio Mix Engine
POWER CORE User Manual
Advertisement
Table of Contents
