LAWO POWER CORE User Manual page 317

18. Configuring Custom Logical Behaviour
For each of the 32 macros, there are four logic outputs: red, green, yellow and blink. These can be found under
the "Logic -> <GroupName> -> Macro" branch of the 'Tree Selection' window. They can be used to signal the
status of the macro - for example, to illuminate the MACRO MF Key:
The logic control outputs can trigger any configuration element, not just MF Key lamps.
Configuring the Macro Functions
The next step is to insert and name all of the elements which will be executed as part of each macro definition.
The elements can then be assembled into macros
The Macro Editor references the configuration elements by their name and type. Therefore, you should give each
element a unique name - for example:
Elements can be controlled from macros and other control signals if required.
Some elements cannot be renamed. For example, the Central Module within the 'Surface' branch of the 'Tree
Definition' window. See
Transferring the System Configuration
Having configured the logical control inputs for your macros (via the Logic -> Macro element) and the functions
themselves, you should now
POWER CORE User Manual
later
Configuring Elements without a Name
save and transfer the configuration to the Lawo system.
Version: V6.0.0/5
using the Macro Editor software.
for more details.
317/459