Table of Contents
Advertisement
14. Snapshots System
Edit Group
This option is used to create and edit user groups. You can define:
·
which snapshot groups can be accessed, and whether users can load, save and delete snapshots.
·
whether the user group has Admin page access.
·
which console operations ("rights") are available to users within the group.
Ø
To create or edit a User Group
1.
From the
Admin
groups on the left (Group), and the snapshot groups they may access on the right (Snap Group):
2.
To create a new user group, select New. (Or, to edit an existing group, select its name and then
Properties) - the 'User Group Properties' window appears:
3.
Select the General tab to edit the:
·
Groupname - enter a name for the user group, e.g. DJs.
·
Comment - you can enter comments if you wish.
·
Admin - tick this box to enable Admin access. This allows all users within the group to open and edit the
Admin pages.
·
Snap Groups - this area defines the snapshot groups which users can access (see next page). On the
left are all snapshot groups defined in the
groups which are available to the user group.
POWER CORE User Manual
page, select Edit Group - the 'Edit User Group' window appears, with a list of user
Version: V6.0.0/5
VisTool snaphots
database. On the right are the snapshot
237/459
Advertisement
Table of Contents
