LAWO POWER CORE User Manual page 144

10.1.2 DMS Loopback/Silence Parameters
Loopback n
Type
Matrix Enable
Silence Thrs low (dBR)
Thrs high (dBR)
Timeout low (sec)
Timeout high (sec)
Note that the audio inputs to the loopbacks correspond to the DMS Input described on the previous page.
144/459
Reference name for the loopback.
Select mono, stereo, 5.1 or 5.1+2 for each loopback.
This option enables matrix control of the loopback, with options for ON, LS and OFF. See
Matrix Enable.
Enter the level at which the silence detect will become active.
Enter the level at which the silence detect will become inactive. Use these two values to
set a range to avoid flicker.
Enter the period of time, for which the level must be below the defined threshold to activate
the silence detect. Use 0 for immediate signalisation.
Enter the period of time, for which the level must be above the defined threshold to
deactivate the silence detect.
Version: V6.0.0/5
10. Audio Utilities
POWER CORE User Manual