Table of Contents
Advertisement
VisTool Editor Configuration
1.
Add some Buttons to a Page.
2.
Right-click on a button, and open up the MF Key -> Screen Src Assign branch. Note that any functions
which have already been used are highlighted in green.
First, add the three buttons which will action the "fader assign" mode:
·
Assign Src - mimics a double-press of the console's ACCESS key. This puts the current fader in access
into "fader assign" mode. Once active, you can choose a source using a source select button (see
below), press Cancel to cancel the operation, or press Remove Src to remove the current source.
·
Cancel - cancels an active Assign Src operation.
·
Remove Src - removes the source from the fader in access and leaves it unassigned.
Then, add the source select buttons (Src001, Src002, etc.). Each of these relates to the Screen sources defined
earlier by the ON-AIR Designer - in our example, Src002 corresponds to our MIC_2 source:
As you assign each button, it updates to show the assigned function. Edit the User Text property to define the
name displayed on the VisTool screen.
3.
Remember to save the project and switch to Test mode to test the fader strip assignments.
252/459
15. Connecting a VisTool MK2 PC
Version: V6.0.0/5
POWER CORE User Manual
Advertisement
Table of Contents
