20.5.3 Control Surface Module Parameters
To monitor the status of a control surface mode, define the following parameters for the module (in the "Surface"
branch of the 'Tree Definition'):
Alarm
General
Once the Alarm field is named, the following control outputs appear under the "Surface -> Module" branch of the
'Tree Selection' window:
Alarm Surface N failed
426/459
Enter the name to be displayed in the Alarm Log Server for the module.
Enter the general purpose name for the module.
This output is true when the surface alarm for the module is active.
Version: V6.0.0/5
20. Maintenance
POWER CORE User Manual