Table of Contents
Advertisement
20.3.10 Setting the System Date and Time
The system date and time can be set using SOP Explorer:
1.
Select the unit you wish to reset and, using the right mouse button, select Set System Time.
2.
Check the IP address to make sure you have selected the correct system and confirm by clicking OK:
The software will now connect to the selected system and set its date and time to match that of your service
computer. You can monitor the progress in SOP status area:
422/459
Version: V6.0.0/5
20. Maintenance
POWER CORE User Manual
Advertisement
Table of Contents
