Table of Contents
Advertisement
12. Intercom
12.3.3 Defining the Intercom Global Parameters
Select each Intercom element and define its Global parameters.
Intercom Local
Intercom
Identifier
LED Time (1/10sec)
Audio Input
Group In Signal
POWER CORE User Manual
Enter a unique reference name.
Enter a unique reference number. This number is used to identify the element within the
InterCom software, see
Adding an InterCom
From version 4.6 software, the Identifier range for nova29 has been increased to 96. Note
that the Identifier range for sapphire and crystal is limited to 48; these systems will ignore
numbers higher than 48.
Enter the timeout for the signalisation of an incoming call. The button lamp/LED will stop
blinking after this time.
Assign the audio input to be used as the talkback source. For our example, this should be
the talkback mic named earlier.
Select this checkbox to enable group key blinking. When enabled, and the group is active,
all group keys to which the caller is assigned blink.
Version: V6.0.0/5
station.
163/459
Advertisement
Table of Contents
