Table of Contents
Advertisement
17. GPIO
MNOPL Server
LS Doublestar
Surface over TCP
POWER CORE User Manual
For use with a z4.
Select this checkbox to enable the remote MNOPL server when interfacing to a z4
system.
This is a project-specific feature.
Tick this option to enable "surface" messages to be transmitted via Ethernet (KS-ETH).
This affects the transmission of "surface" messages to/from Key Panels using the
firmware KS16. It can be used to prevent CAN bus buffer overflows.
Version: V6.0.0/5
285/459
Advertisement
Table of Contents
