LAWO POWER CORE User Manual page 231

14. Snapshots System
14.5.3 Global & Channel Snapshot Buttons
If you are operating the snapshots system from VisTool, then up to 9 Global Snapshot and 9 Channel
Snapshot buttons may be configured. These allow you to quickly load VisTool snapshots from dedicated MF
Keys, bypassing the Load PC Snap
Global Snapshot buttons can load any Full snapshot; Channel Snapshot buttons can load any Src snapshot.
The assignment of which snapshot is loaded must be made by your administrator (from the
Snaps window).
If your configuration supports these buttons, then you will have dedicated snapshot load MF Keys on your
console or VisTool display. Use the
Global Snapshot and Channel Snapshot buttons.
The VisTool display below, provides access to all 9 Global and Channel snaphot buttons:
1. Select a button to load the snapshot.
The button turns red while data is loaded; it returns to green when the load is complete.
If your system is configured with
your administrator (using the
users.
For more details on assigning snapshots to the Global Snapshot and Channel Snapshot buttons, see the
Admin Pages: Edit Snaps
POWER CORE User Manual
dialogue boxes.
"Logic -> VispageSwitch" branch of the 'Tree Definition' to configure the
User Access Rights, then the snapshots you can access are defined by
snapshot groups). This means that some snapshots may not be available to all
in the VisTool MK2 User Guide.
Version: V6.0.0/5
Admin Pages: Edit
231/459