LAWO POWER CORE User Manual page 398

20.2.5 The RAVENNA Menu
The RAVENNA menu contains 7 tabs. Most of these are informational in nature, although it is possible to change
a few options using options found on the "Global" and "PTP" tabs. This information may be used for
troubleshooting and to determine the presence and activity of configured streams.
Global Tab
The Global tab displays Power Core's RAVENNA channel addresses and ports which have been preconfigured
using On Air Designer. Channels may be enabled or disabled using adjacent check boxes.
As a convenience, you may enter new temporary settings, but we strongly recommend that new permanent
values be configured using On Air Designer as temporary changes will be lost after Power Core reboot. Any
temporary changes made require RAVENNA to be restarted in order to take effect.
·
mDNS Channels. Four Power Core RAVENNA channel addresses using the multicast Domain Name
System defined in IETF RFC 6762 are displayed, with their multicast IP addresses and port numbers.
·
SAP Channels. Same as above, except displays channel information which uses the Session
Announcement Protocol defined in IETC RFC 2974.
·
Control shows whether RAVENNA is currently running or stopped.
398/459 Version: V6.0.0/5
20. Maintenance
POWER CORE User Manual