LAWO POWER CORE User Manual page 164

Intercom Net Server
As for Intercom Local, but with the following exceptions and additions:
Identifier
IP Addr[3]
IP Addr[4]
Intercom Net Client
As for Intercom Local, but with the following exceptions and additions:
Identifier 1 to 4
activate 2, 3, 4
164/459
This number will identify the element within the
Intercom Net Client.
Enter the third and fourth byte of the Intercom Net Client's IP address. This is used to
identify the client to the server, in conjunction with the Identifier number.
Enter the same Identifier number as configured on the Intercom Net Server.
You can enter up to four different Identifiers (Identifiers 2, 3 and 4 are enabled by the
activate control signals). This allows the client to connect and work with different Intercom
Net Server elements (these may be on different systems).
Version: V6.0.0/5
12. Intercom
InterCom software AND within the
POWER CORE User Manual