LAWO POWER CORE User Manual page 152

11.2.3 Connect -> Matrix Query
This element provides the ability to monitor the status of a matrix connect, and produce a "logical 1" control
signal if the connect is removed. For example, to trigger an alarm if an important route is removed.
Every "Matrix Query" can monitor an internal or external matrix address. Note that the input and output you use
must have their Matrix Enable
Matrix Query
Matrix Input
Matrix Output
External
External Protocol Type
Ember+ Matrix Nr
152/459
option set.
Reference name for the element.
Enter the address of the matrix input to be monitored (see
Enter the address of the matrix output to be monitored (see
Select this checkbox if the matrix to be controlled is external (i.e. not within the system
frame).
If External is ticked, select the communication protocol type:
·
CAN over TCP/IP - for sapphire, crystal, Nova29 or POWER CORE.
·
2
MNOPL - for mc /Nova73.
·
EmBER+ - for supporting EmBER+ devices.
When using Ember+, you must enter an Ember+ Matrix number (from 1 to 5). This
references the Ember+ Matrix
external matrix type, matrix name, etc.)
Version: V6.0.0/5
element (which defines the local consumer number,
11. Routing Matrix
Matrix Numbers).
Matrix Numbers).
POWER CORE User Manual