Table of Contents
Advertisement
Client - Source Configuration
The final step is to add and configure the sources within each client configuration. This is done by opening the
Source element you wish to configure:
1.
Assign the Audio Input which will receive the incoming microphone signal – in our example, via the
MADI link from the server.
2.
In the Matrix Mic Nr box, enter the
– in our example, 101.
If a Mic Arb Offset was entered within the server's
here.
3.
In the Matrix Gnet Port box, enter the GPI/O Network port number which connects to the Nova17 – in
our example, port 1.
4.
Repeat these steps for the second client, this time entering 102 for the Matrix Mic Nr, and port 2 for the
Matrix Gnet Port.
5.
Save and download all of the server and client configurations.
You can now switch control of the microphone settings between clients by triggering the corresponding control
signals - i.e. the Condition signals for Mic Input Nr x (defined in the servier's
362/459
19. Networking POWER CORE
reference number
you defined earlier within the server's configuration
GPI/O Network
configuration, then the offset is applied
Version: V6.0.0/5
Mic Arbitration
element).
POWER CORE User Manual
Advertisement
Table of Contents
