Table of Contents
Advertisement
19. Networking POWER CORE
19.4.2 Multi-system Networking
The Network Assign system is designed to manage the assignment of matrix signals to different Network
transmission feeds within a networked installation. In the example below, three studios can be assigned to up to
three Local Lines within three Networks:
The system can support up to 13 studios divided into 12 Networks and 9 Local lines. The assignments are then
controlled from VisTool screen buttons.
To use this feature you will need to add a Network Assign Module to slot 13 of the
of the networked systems. Then define the module's parameters as follows.
General Parameters
Network Assign
POWER CORE User Manual
Enter a reference name for the Matrix Module.
Version: V6.0.0/5
Screen
configuration on each
371/459
Advertisement
Table of Contents
