LAWO POWER CORE User Manual page 91

9. Audio Mix Engine
9.1.10 Inserts
In addition to onboard signal processing, each source supports an insert send and return. The devices which are
available for insertion are defined in the configuration. Note that:
·
Mono devices can only be assigned to a mono source.
·
Stereo devices can be assigned to a mono or stereo source. If a stereo device is inserted on a mono
source, then only the left channel is used.
·
Inserts are not supported by summing busses.
Configuring Insert Devices
Open the "System -> Definition -> Parameter = Insert" branch of the 'Tree Definition' to configure the insert
devices. You can use any audio inputs and outputs for the connections to a mono or stereo insert device.
Parameter Insert – reference name for the element.
Insert N Enter a name for the insert. This is both the reference name and the name which will be
displayed on the control surface, so use 6 characters or less.
Type: Stereo When checked the insert device is treated as a stereo device, and when unchecked a mono
device – see the notes above.
Output L Assign the outputs (sends) to the insert device.
Output R
Input L Assign the inputs (returns) from the insert device.
Input R
POWER CORE User Manual Version: V6.0.0/5 91/459