LAWO POWER CORE User Manual page 81

9. Audio Mix Engine
disable Surr. Pan This control input disables the Surround Pan parameters on the Channel and Central Modules
– LCR, front-rear, Centre slope and LFE level. This can be used to simplify operation for a
stereo installation. Note that 5.1 panning is only available if 5.1 or 5.1+2 Sums are configured.
Access This control input will action the fader access key for the source. For example, to action an
access key from a GPI.
Mono Available on stereo sources only. This control input monos the source.
ms -> xy Available on stereo sources only. This control input converts an ms input to xy.
Stereo Available on stereo sources only. This control input resets the source to stereo.
Left -> Both Available on stereo sources only. This control input routes the Left audio input to both sides of
the source.
Right -> Both Available on stereo sources only. This control input routes the Right audio input to both sides of
the source.
Side Swap Available on stereo sources only. This control input reverses the Left and Right audio inputs at
the input to the source.
Phase Available on mono and stereo sources only This control input reverses the phase of the source.
Start Mic AutoGain Available on microphone input sources only. This control input starts the
Cycle measurement process.
POWER CORE User Manual Version: V6.0.0/5
AutoGain
81/459