Table of Contents
Advertisement
Defining the Conference Sources
1.
Select the first source - for example, "Source -> Microphones -> MIC DJ".
2.
Assign the conference bus output to the Conf 1 Bus parameter (from the Conf menu tab):
3.
Repeat to assign each conference bus to its source.
To create an N-many, assign the same conference bus to multiple sources.
To use the second conference system, assign the bus to Conf 2 Bus. (The Conference bus should also have
its Conf 2 parameter enabled, see step 1.)
100/459
Version: V6.0.0/5
9. Audio Mix Engine
POWER CORE User Manual
Advertisement
Table of Contents
