9. Audio Mix Engine
9.1.2
Creating Sources
The "Source" branch of the 'Tree Definition' allows you to insert and configure sources.
Each source can support several sets of parameters. Switch between them using the menu tabs at the top of the
parameter area.
The most important fields are the source Name and Type (defined in the Parm tab):
A source must be named before it can be referenced to other elements via the 'Tree Selection'.
The Type defines whether this is a normal audio source (mono, stereo or surround) or a special source such as a
VCA
Group, Minimix, R3LAY or Protools. This section covers normal audio sources. The other source types will
be described later.
POWER CORE User Manual
Version: V6.0.0/5
77/459