LAWO POWER CORE User Manual page 318

18.14.3 Installing the Macro Editor
System Requirements
Macro Editor PC
To install and run the Macro Editor, your computer MUST meet or exceed the following requirements:
·
Operating System: Windows XP Professional SP3 or Windows 7 Ultimate. Note that Windows 10 LTSB
(Long Term Servicing Branch) for Enterprise installations is not supported.
·
Processor: Intel™ Core i3 530 (or higher equivalent processor).
·
Random access memory (RAM): 2GB
·
Ethernet interface: 100MBit/s
The Macro Editor software serves exclusively for the definition of macros and their transfer to consoles; it
does not provide the actual functions and it is not required for operation.
Lawo System
The Lawo system MUST be running OS Version 2.7 software or higher.
You can check the OS version using the
If the OS-Version is lower than 2.7, please contact your local Lawo representative or email support@lawo.com.
crystal and Nova29 systems do not support Macros.
Network
You should connect the Macro Editor PC to the Lawo control system either directly or via a network switch. Do
NOT use an Ethernet hub as this will interrupt the data stream. See
318/459
18. Configuring Custom Logical Behaviour
Web UI.
System Connections:
Version: V6.0.0/5
Ethernet.
POWER CORE User Manual