Table of Contents
Advertisement
18. Configuring Custom Logical Behaviour
3.
To name the element, right-click on the existing name and select Rename.
4.
Type the name of the element and press Enter.
5.
Within the Parameter Area, tick the check box which describes the type of the element - e.g. TFF.
The Macro Editor references each element by name and type. Therefore, these MUST match those given
within the system configuration, see
6.
Enter a Description for the element if you wish.
7.
Having made changes within the Parameter Area, click on Apply to adopt the changes:
8.
Repeat steps 2 to 7 for every element you wish to include within a macro definition.
9.
You can delete unwanted elements, such as the dummy KeyXY entry by right-clicking and selecting
Delete:
POWER CORE User Manual
Configuring the Macro
Functions.
Version: V6.0.0/5
325/459
Advertisement
Table of Contents
