LAWO POWER CORE User Manual page 211

13. Control Surface Configuration
The following control outputs appear under "Logic -> Definition -> Parameter Fader":
Scale +9dB active
Scale 0dB active
User Labels active
Global Layer 1 active
Global Layer 2 active
Hot Fader Mode active/not
active
If you are switching between fader scales during operation, you could use these control outputs to signal the fader
scale status on a button lamp.
POWER CORE User Manual
True when the +9dB fader scale is active.
True when the 0dB fader scale is active.
True when User Labels are active.
True when the Global Layer 1 switch is active.
True when the Global Layer 2 switch is active.
True when Hot Fader Mode
Version: V6.0.0/5
is active (or not active).
211/459