Table of Contents
Advertisement
14. Snapshots System
Ø
Snapshot Properties
1.
Select the Snapshots tab to edit the default snapshot group, and order of any login snapshots, for the
user:
·
Default Snap Group - select a snapshot group from the drop-down menu - in our example, Music
Shows. This becomes the group which is automatically selected whenever the user attempts to Save,
Load
or
Erase
a VisTool snapshot.
·
Snapshot Order - snapshots entered in this list are loaded immediately after the user logs in. This can
be used to automatically reset the console for the user's show, or type of work, whenever they login to the
console.
2.
To configure the console to load snapshots after login, use the Add and Del buttons to move entries from
the Snapshots list (on the left) to the Snapshot Order list (on the right):
The Snapshots list (on the left) shows everything available in the user's snapshot groups. Remember that the
available snapshot groups are defined by
3.
Use the Up and Down buttons to change the order in the Snapshot Order list (on the right). Snapshots
load from top to bottom after the user successfully logs in.
In our example, the system will load the full snapshot for the talk show, followed by the source snapshot for
the DJ - Tom. By entering multiple snapshots in this list, you can easily configure the console for individual
users.
POWER CORE User Manual
editing the user
group.
Version: V6.0.0/5
243/459
Advertisement
Table of Contents
