Table of Contents
Advertisement
20. Maintenance
If at any stage, you see the following message, then there has been a problem with the update:
In our example, the red cross beside the zirkon system name indicates that there is a problem with the network
connection. Check all connections and IP settings and try again; hopefully this time you will be successful!
6.
When the update is complete, press the refresh button
System module:
All modules, other than fixed modules, should now show that they are equalized
date).
7.
Now repeat the process to update any IOs, the Surface and any Key Panels.
8.
As before use the refresh button
9.
After updating, it is necessary to
10.
Finally, test the system to check that everything is functioning correctly.
POWER CORE User Manual
to check that all Surface modules are now up to date.
transfer
the configuration.
Version: V6.0.0/5
and check the software status for each
(i.e. the software is up to
417/459
Advertisement
Table of Contents
