Table of Contents
Advertisement
9.6.2
Creating a Minimixer
Each Minimixer should be inserted under the "Minimix" branch of the 'Tree Definition'.
9.6.3
Audio Parameters
Use the Global, Dim and Mute tabs to adjust the audio parameters as follows.
Global Parameters
Minimixer
In L
In R
Mono
Phase
Side
Level
Level Left
Level Right
Balance
118/459
Reference name for the element.
Assigns the audio sources for the left and right inputs to the Minimixer.
Assigns an input control signal to mono the left and right channels of the Minimixer; the
two channels are mixed and an attenuation of 3dB applied.
If you wish to use the Minimixer as a 2-into-1 mono mixer, assign a Logical function whose
result is always true (e.g. a
NOT
Mono mode.
Assigns an input control signal to phase reverse the right channel of the Minimixer.
Assigns an input control signal to route the right input to the left output and vice versa.
Assigns a level control to adjust the main level of the Minimixer.
The Default Level is applied when nothing is assigned to the Level function.
Assigns a level control to exclusively adjust the main left and right channels of the
Minimixer; the overall Level is then superimposed. This function permits level balancing.
The Default Level(s) are applied when nothing is assigned to Level Left or Level Right.
Assigns a level control to adjust the left/right balance of the Minimixer.
Version: V6.0.0/5
logic element with no input) to force the Minimixer into
9. Audio Mix Engine
POWER CORE User Manual
Advertisement
Table of Contents
