Table of Contents
Advertisement
3.
Repeat for each button of each InterCom station – for example:
12.4.9 Saving and Transferring the InterCom Configuration
The InterCom configuration is automatically saved into the file path you entered earlier when you close the
application. If you wish to create different InterCom setups, you can use File -> Save As to save the database
under a different file name.
To make the InterCom configuration active, it must be transferred to the system via TCP/IP. The configuration is
then stored on the control system and loaded whenever the system powers on.
You can transfer a new InterCom configuration without restarting the system. This allows you to modify
InterCom functions while the system is running online.
1.
First make sure that your InterCom PC is connected and communicating with the system you wish to
transfer to.
2.
Then check that you have
3.
Select File -> Send Configuration to transfer the current InterCom configuration to the system.
4.
Once the transfer is complete, test your InterCom setup.
180/459
Define St 1:
Define St 2:
Define St 3:
transferred
the system configuration which supports your InterCom setup.
Version: V6.0.0/5
12. Intercom
POWER CORE User Manual
Advertisement
Table of Contents
