LAWO POWER CORE User Manual page 205

13. Control Surface Configuration
13.4.5 MF Key Mappings
MF Key mappings can be used to swap the functions of MF Keys according to the production or user
requirements.
Note that the mappings affect all MF Keys on the Fader Module. So, to change the function of MF Keys globally
across the console, remember to modify the MF Key Mappings for all Fader Modules. MF Key mappings are
stored as a "one-shot" setup in the configuration. This means that you will need to upload a new configuration to
change from one set of MF Key mappings to another.
Open the "Surface -> Fader Module" branch of the 'Tree Definition', and select the MF Key Mapping tab to
configure MF Key mappings.
In each case, use the drop-down menu to assign a logical MF Key to the physical MF Key. Note that MF 1 to 9
correspond to the MF Keys on a sapphire with a Key Extension module.
Once the configuration is uploaded, the MF Keys on the selected Fader Module will update accordingly.
POWER CORE User Manual Version: V6.0.0/5 205/459