Table of Contents
Advertisement
Source Parameters
on the Ember+ Consumer
Ø
On the Ember+ consumer:
1.
Open the Source element you wish to replicate.
2.
Enter a Source Replication element number. This must match the number defined for the Ember+
SrcRepl element (highlighted in blue). The same number can be assigned to several Sources.
3.
Enter a Source Replication Name. This will be used to identify the Source in the provider (as described
below).
Ø
On the Ember+ provider:
1.
Open the Source element you wish to couple.
2.
Set the Display name field so that it matches the SrcRepl Name entered on the Ember+ consumer
(highlighted in red).
3.
Enter the Local provider number, as defined in the "System -> Definition -> Parameter = Local Providers"
branch of the 'Tree Definition' (highlighted in dark green).
368/459
19. Networking POWER CORE
Version: V6.0.0/5
on the Ember+ Provider
POWER CORE User Manual
Advertisement
Table of Contents
