Table of Contents
Advertisement
20. Maintenance
20.5.2 Configuring an Alarm Log Server
To support an external Alarm Log Server, you will need to define an Alarm element to the "Logic" branch of the
'Tree Definition'.
ALARM
Trigger
Invert
Text Rising Edge
Text Falling Edge
Info
Alarm Number
Unit
Address
POWER CORE User Manual
Reference name for the element.
Assigns the input control signal which will transmit the Text Rising and Text Falling Edge
messages at each status change.
When checked, the input control signal is inverted.
Enter the text which will be transmitted to the external Alarm Log Server system at the
rising edge of the Trigger signal.
Enter the text which will be transmitted to the external Alarm Log Server system at the
falling edge of the Trigger signal.
When checked, this output is treated as an 'Info' message within the Alarm Log Server
system, as opposed to an 'Alarm' message.
Enter a specific error code which you wish to be transmitted to the external messaging
system.
The unit number is transferred to the Alarm Log Server. For example, you may set Studio 1
as Unit 1, etc.
This is an Address transferred to the Alarm Log Server. For example, you may use this to
identify different system addresses.
Version: V6.0.0/5
425/459
Advertisement
Table of Contents
