Table of Contents
Advertisement
20.3.6 SoP Explorer: Properties
Right-click on a system and select Properties to open the 'Properties' window:
If more than one system has been added to SoP Explorer, you can use the Unit field to select a system from
the drop-down menu.
The following properties can be edited:
·
Ip - enter the IP address of the Lawo control system. This must be entered correctly, otherwise network
communication cannot be established.
·
Name - this identifies the system within SoP Explorer. A default name of Zirkon is given to each new
unit. It is a good idea to edit the name so that systems can be easily identified. Choose something short
but descriptive such as crystal St 1.
·
Group - is reserved for future implementation; the default group is always Zirkon.
·
Sample Freq - this field is used to select the sample frequency for sapphire, zirkon or Nova17. It has
no function for other systems.
Master Board Part Number
947/81
947/82
947/83
947/85
947/86
947/62
947/65
The sample frequency selected
fitted with the 947/82 Master Board.
·
Configuration - this field is optional, and can be used to enter the file path for the system configuration.
You do not have to enter a configuration, but if you do, you will able to open the ON-AIR Designer
software with your configuration already loaded by clicking on the
bar.
·
Comment - this field is optional, and can be used to enter notes about the system.
414/459
Valid Sample Freq
48 kHz
48 kHz
44.1 kHz or 48 kHz
44.1 kHz
44.1 kHz or 48 kHz
44.1 kHz or 48 kHz
44.1 kHz or 48 kHz
MUST
be valid. For example, DO NOT select 44.1kHz if your system is
Version: V6.0.0/5
20. Maintenance
button from the
SoP Explorer tool
POWER CORE User Manual
Advertisement
Table of Contents
