Table of Contents
Advertisement
9. Audio Mix Engine
9.1.7
Editing Display Names
The Display field is used to name the fader label for a source. This is different to the Reference name which
identifies the source within the configuration.
1.
Select the source you wish to edit in the 'Tree Definition' and open the Parm tab.
2.
In the Display field, enter the name for the source as you want it to appear on the control surface.
Enter six characters or less so that the name can appear in full on the control surface displays.
You can use copy (F5) + paste (F6) or incremental paste (F7) to quickly edit a series of source names.
POWER CORE User Manual
Version: V6.0.0/5
87/459
Advertisement
Table of Contents
