13. Control Surface Configuration
13.3.1 Adding a Virtual Module
Virtual modules are configured from the Frames -> Surface window:
1.
Right-click on an empty Fader Module slot and select Fader Module Virtual (or, on sapphire only,
right-click on an empty Rotary Extension slot and select Rotary Extension Module Virtual):
You can increase your control surface frame size to create empty slots from the
2.
Repeat to assign all the virtual modules required - for example.
The number of mono (and equivalent stereo or surround) sources that can be mixed simultaneously is
determined by the DSP Core resources. Therefore, the source configuration will determine whether you have
enough resource to support virtual fader strips.
To provide operator access to these virtual sources, you must now configure
POWER CORE User Manual
Version: V6.0.0/5
Frame Selection
menu.
fader
mappings.
187/459