Table of Contents
Advertisement
9. Audio Mix Engine
9.9.3
Signal Present Indication (on the Surface)
Open the "System -> Definition -> Parameter = Signal Present" branch of the 'Tree Definition' to define the signal
present metering on the Fader Modules (the fader strip backlight).
The fader strip backlight can be configured to show signal present, source colour or to run in mix mode for
each source configured in the "Source" branch of the 'Tree Definition', see
Parameter
State 1 to 8 Thrs
Low
Blink
Color
In our example, the signal present indicator will illuminate as follows:
·
Signals > -30dBR – green.
·
Signals > -9dBR – half-lit yellow.
·
Signals > -3dBR – fully-lit yellow.
·
Signals > 0dBR – half-lit red.
·
Signals > 6dBR – fully-lit red.
POWER CORE User Manual
Signal Present – reference name for the element.
Enter the threshold level (dBR) at which you wish the backlight to illuminate.
Tick this box for half lit.
Tick this box for flashing.
Select the color for the illumination.
Version: V6.0.0/5
Source
Color.
133/459
Advertisement
Table of Contents
