Table of Contents
Advertisement
Configuring the Units
The Macro Editor transfers macro definitions to each system via TCP/IP network. Therefore, the first step when
creating a new configuration is to define the name, IP address and description of each unit:
1.
Open up the Units branch within the Selection Area on the left of the display to view the units.
If this is a new configuration you will see a single unit called Zirkon with the default IP Address and a default
Description.
2.
To change the name of the unit, right-click on the existing name and select Rename:
3.
You can now type a new name and press Enter.
4.
Edit the IP Address to match that of your unit within the Parameter Area, and change the Description if
you wish.
5.
After making changes with the Parameter Area click on Apply to adopt the new settings.
322/459
18. Configuring Custom Logical Behaviour
Version: V6.0.0/5
POWER CORE User Manual
Advertisement
Table of Contents
