LAWO POWER CORE User Manual page 267

15. Connecting a VisTool MK2 PC
Snapshots Parameters
These parameters assign control signals to the nine
Global Snapshot
1 to 9
Channel Snapshot
1 to 9
The control outputs appear under "Logic -> <GroupName> -> VispageSwitch" in the 'Tree Selection' window:
GlbSnap n defined
ChanSnap n defined
POWER CORE User Manual
Global and Channel snapshot
When this control signal is active, the corresponding global snapshot is loaded.
The 9 Global Snapshot buttons can load any Full snapshot. The assignment of
snapshots to buttons is made in the
As above, but Channel snapshot buttons can load any Src snapshot.
True when global Snapshot n is defined within the
VisTool MK2.
True when channel Snapshot n is defined within the
VisTool MK2.
Version: V6.0.0/5
buttons:
Edit Snaps window.
user rights system supported by
user rights system supported by
267/459