Table of Contents
Advertisement
15. Connecting a VisTool MK2 PC
4.
Assign the output of the OR8 element to the correct page Select field.
Select 1 corresponds to page index 1, Select 2 to page index 2, and so on. Therefore, look at your VisTool
Editor configuration and take a note of the page index of your EQ page. In our example, it is page index 6, and so
we have assigned the control signal to page Select 6:
5.
Return to the MF Key element, and assign the Selected 6 control output to a lamp colour - this will
ensure that the MF Key lights when the EQ page is selected:
6.
Repeat for each VisTool page you wish to switch - e.g. input parameters, dynamics parameters, pan
parameters.
POWER CORE User Manual
Version: V6.0.0/5
271/459
Advertisement
Table of Contents
