LAWO POWER CORE User Manual page 15

4. The Hardware
4.1.2 The STATUS LED
The STATUS LED indicates the health of the device and sync status:
·
LED blinking at regular intervals = the device is working properly; the LED color reflects the
·
LED steady state and white = the device is booting.
·
LED steady state and not white = the device has an internal problem.
The table below describes all possible states.
LED Color
Blue
Yellow
Red
Green
Magenta
Off
White
POWER CORE User Manual
Status if LED is Steady State
System failure
System failure
System failure
System failure
System failure
System powered off
System starting
Version: V6.0.0/5
sync
Status if LED is Blinking
Synchronized to PTP master
Trying to sync to PTP master
Synchronized to internal clock
Synchronized via Wordclock
Synchronized via MADI
not applicable
not applicable
status.
15/459