LAWO POWER CORE User Manual page 389

20. Maintenance
Network Settings Tab
As the name implies, this screen permits access to network settings.
·
Settings. Using the fields in this box, you can enter the Domain Name of your network, DNS server IP
addresses, NTP server and Syslog server addresses.
o Your NTP Server may be entered either by entering its name in the Server Name box, or its IP
Address in the Address box. If you type "ntp.internal" in the Server Name box, the IP Address will be
automatically filled.
o Your Syslog Server may be entered in the same manner. If you type "syslog.internal" in the Server
Name box, the IP Address will be automatically filled.
·
Gateway Priorities By Device. These options allow you to determine which of Power Core's front-panel
Ethernet ports will be used as the control port should the primary link be interrupted. Priority 1 is
generally assigned to the "dwc0" port; use the remaining Priority fields to prioritize fallback ports.
The control box labelled "Routes" is reserved for future use. This feature is not implemented at the time of this
writing.
POWER CORE User Manual Version: V6.0.0/5 389/459