LAWO POWER CORE User Manual page 14

12 Expansion Card Slots x 8 (optional)
Up to 8 plug-in IO cards can be fitted to the expansion slots at the rear of the frame. All cards are hot-pluggable.
Options include: MIC/LINE, LINE IN, LINE OUT, STUDIO IO, AES3 IO and MADI IO.
13 CASE
The CASE grounding screw should be used to ground the frame.
14 12V DC Input & AC Mains Input
Every device comes with dual power feeds: AC and DC. To use the DC input, you will need an external 12V DC
power supply. The 955/50-80 power supply can be ordered separately.
If both inputs are connected, then AC provides the main and DC the redundant power supply.
WARNING: POWER CORE MUST be connected to the mains using the power cable supplied with the
system.
4.1.1 The Front Panel Display
The front panel display can be used to view local device parameters.
1. Turn the rotary control to step through the available pages. Each page includes a blue title field:
Welcome, Product, etc.
Useful parameters include the device's IP address, serial number, firmware versions, network port IP settings,
system clock reference (date and time), temperatures, fan speeds and voltages.
In the current release, the "SEL" function can be used to adjust parameters but any changes are not stored by
the device. Therefore, it is recommended to use other methods, such as the Web UI or ON-AIR Designer to adjust
parameters.
14/459
Front View
Version: V6.0.0/5
4. The Hardware
POWER CORE User Manual