Table of Contents
Advertisement
8. Audio IO
MIC/LINE IN
Input Parameters
Input N
Use this field to name the input.
For mono inputs, you can enter up to 16 characters.
For stereo or surround inputs, a two character suffix is automatically added (e.g. ".L").
Therefore, names should be limited to 14 characters.
Type / Stereo
Use the Type drop-down menu (on Input 1) to select:
·
·
·
·
On odd numbered inputs, select the Stereo checkbox to link the odd/even pair for stereo
operation.
Offset Gain
Here you can enter a fixed analogue offset gain for the input.
For Mic inputs, this is separate from the operator-controlled "mic" gain on the surface.
Matrix Enable
This option enables matrix control of the input. There are three options in the drop-down
menu:
·
·
·
After a
matrix output.
Line
Use this checkbox to choose Mic or Line level operation.
The mode changes the input impedance and also determines which controls become
available when the source is assigned to a control surface:
·
·
48V
Select this checkbox to enable 48V phantom power permanently. For example, to apply 48V to
a talkback microphone.
Fixed Mic Gain
Here you can choose a fixed microphone input gain that cannot be changed by the operator.
For example, to enter a fixed input gain for a talkback mic.
POWER CORE User Manual
Mono.
Stereo – links inputs 1-2 for stereo operation.
5.1 – links inputs 1-6 for L, R, C, LFE, Ls, Rs surround.
5.1+2 - links inputs 1-6 for L, R, C, LFE, Ls, Rs surround + inputs 7-8 for stereo.
ON – sets the input for
"Matrix
such as the MtxCon (NovaConnect) software.
LS - sets the input for control from the optional Line Scheduler (LS) product. Please contact
your local Lawo representative for details.
OFF – the input is not enabled for external matrix control.
cold
start, any inputs set to Matrix Enable ON or LS may need to be connected to a
For Mic inputs, operators can adjust mic gain, 48V and a high-pass "rumble" filter.
For Line inputs, these parameters are not available.
Version: V6.0.0/5
Connect" or
"Matrix
Query" functions, or external matrix control
59/459
Advertisement
Table of Contents
